| |||||||||||||||
|
Sleepy Creek Traps
Available in Standard Regular Jaw and Offset Jaw for Land Trapping #1 3/4 Sleepy Creek Coil Spring (Made in the USA) - Standard Jaw 5 3/8" jaw spread #1 3/4 Sleepy Creek Coil Spring (Made in the USA) - Standard Jaw 5 3/8" jaw spread with wide corner radious to prevent cutting. For fox, coyote, bobcat, raccoon, badger, otter, nutria, etc. We recommend that you use standard jaw if you plan on both land and water trapping with the same trap. Excellent Combo Trap. Springs Heavy Duty 9 Gauge Spring Wire. Levers Heavy Duty .075 Thick Steel. Chain 2/0 Double Link with three Swivel points. End swivel is universal and can be used as a drowner lock or to attach to a rebar stake. Heavy two piece frame the base is reinforced with thick chain strap and the chain is center mounted. A Well Built Trap! #1 3/4 Sleepy Creek Coil Spring (Made in the USA) - Standard Jaw 5 3/8" jaw spread 1/2 Dozen $69.99 #1 3/4 Sleepy Creek Coil Spring (Made in the USA) - Offset Jaw 5 9/16" jaw spread the face averages nearly twice that of a standard jaw. Offset Jaws have a gap between the Jaws and are designed for land trapping causing much less chance of foot and leg damage on the Furbearer. If you are a water trapper we recommend that you use standard jaw traps. For fox, coyote, bobcat, raccoon, badger, otter, nutria, etc. Excellent Combo Trap. Springs Heavy Duty 9 Gauge Spring Wire. Levers Heavy Duty .075 Thick Steel. Chain 2/0 Double Link with three Swivel points. End swivel is universal and can be used as a drowner lock or to attach to a rebar stake. Heavy two piece frame the base is reinforced with thick chain strap and the chain is center mounted. A Well Built Trap! #1 3/4 Sleepy Creek Coil Spring (Made in the USA) - Offset Jaw 5 9/16" jaw spread 1/2 Dozen $74.99 Sleepy
Creek Traps All Sleepy Creek Traps Below!
About Sleepy Creek Manufacturing, Inc. They have been in business since 1994. It started with a coil spring trap setter and has grown into over 24 top quality traps and accessories. SCM is setting new standards in the trap making industry. All products are made and assembled in the U.S.A.. Their Tool and Design Engineer and Research and Development Engineer have been trapping for over 40 years. They combine their knowledge of trapping and tooling to make the best trap for the trappers dollar. Sleepy Creek Mfg also believes in our Trapping Heritage and supports the NTA and FTA in their effort to keep it going. |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||